STM Canna Cone Lander Pre-Roll Cone Loading Machine

Tired of spending hours manually loading pre-roll cones? The tedious hand-filling process is slowing down your production and costing you valuable time.

The STM Canna Cone Lander eliminates this bottleneck entirely. As a precision-engineered pre-roll machine, it loads 72 pre-roll cones in just 2-3 seconds, transforming your workflow from manual labor to automated efficiency.

Perfect for growing pre-roll businesses, the Cone Lander automates the most time-consuming part of your process while delivering consistent, reliable results. Focus your team on higher-value tasks like precise weighing with a module like the STM Canna LaunchPad, while the machine handles the repetitive work with unwavering accuracy.

Designed to integrate seamlessly with STM's One-Tray Automated Workflow, the Cone Lander supports 84mm, 98mm, and 109mm cone sizes. Each machine is calibrated for one specific cone size to ensure optimal performance. The system works best with Zig Zag brand cones, though compatibility with other brands may vary.

The STM Cone Lander is backed with a 1-year warranty ensuring reliability and peace of mind. Zigzag cones are highly recommended with the use of this machine.

Note: The Cone Lander only loads one specific size per machine.

*This is not a pre-roll machine, this only loads cones into the trays

Highlights:

84mm, 98mm, 109mm cones (Zigzag highly recommended)
Fills up to 72 cones per cycle
2-3 seconds cycle time per tray
Best with Zig Zag cones; other brands may vary in success rate
One-year warranty

STM Canna Cone Lander automated cone loading

STM Canna Cone Lander three-step process

The Cone Lander's Three-Step Process

Using the Cone Lander is as simple as 1-2-3.

Watch the process in action here

Pull out the side drawer and load full stacks of empty pre-rolled cones
Place an empty STM 72-count tray into the drawer, then close the drawer and front door
Select your crutch size, push the cycle button, and wait 2-3 seconds for 72 cones to load

What's Included

STM Canna Cone Lander Machine (specify size: 84mm, 98mm, or 109mm)
One-year manufacturer warranty
User manual and setup guide

Features

High-Speed Loading

The STM Canna Cone Lander loads 72 pre-roll cones in just seconds, saving time and ensuring consistency.

Seamless Workflow Integration

Designed to work with STM's One-Tray Automated Workflow for maximum productivity. It seamlessly integrates with other equipment, such as the STM Revolution 2.0 grinder for material preparation and the Atomic Closer 2.0 for finishing the pre-rolls.

Precision Cone Loading

The Cone Loader supports specific cone sizes (84mm, 98mm, 109mm) for consistent results every time.

Effortless Operation

The filling is as easy as 1-2-3, with its three-step loading process.

📏

Size-Specific Design

Each machine is calibrated for one specific cone size to ensure optimal performance.

🏭

Commercial-Grade Build

Robust construction designed for continuous operation in production environments.

Specifications

Specification	Value
Cone Capacity per Cycle	72 cones
Cycle Time	2-3 seconds per tray
Supported Cone Sizes	84mm, 98mm, or 109mm (one size per machine)
Compatible Tray	STM 72-count tray
Recommended Cone Brand	Zig Zag (other brands may vary in success rate)
Workflow Compatibility	STM One-Tray Automated Workflow
Warranty	1 year manufacturer warranty

Warranty

Sesh Technologies Manufacturing warrants the Covered Product to be free of all defects in material and workmanship for 1 year from the date of purchase. This warranty extends to the original buyer only and is non-transferable. There are no warranties on paper products.

Within the period of this warranty, Sesh Technologies Manufacturing will repair or replace, free of charge, any part proving defective in material or workmanship. All warranty repairs and service must be performed by an authorized Sesh Technologies Manufacturing technician, or at an authorized Sesh Technologies Manufacturing service facility.

FAQs

What cone sizes does the STM Canna Cone Lander support? +

The Cone Lander supports three cone sizes: 84mm, 98mm, and 109mm. Each machine is designed to handle one specific size, so you'll need to specify which size you need when ordering. This size-specific calibration ensures optimal loading performance and consistency.

How fast can the Cone Lander load pre-roll cones? +

The Cone Lander loads 72 pre-roll cones in just 2-3 seconds per cycle. This rapid loading speed significantly reduces production time compared to manual methods, allowing your team to focus on other critical tasks in the pre-roll manufacturing process.

What brand of cones works best with this machine? +

Zig Zag brand cones are highly recommended for use with the Cone Lander. While the machine may work with other cone brands, success rates can vary depending on the cone manufacturer's specifications and quality consistency. For optimal results, we strongly suggest using Zig Zag cones.

Does the Cone Lander fill the cones with cannabis material? +

No, the STM Canna Cone Lander is specifically designed to load empty pre-roll cones into STM's 72-count trays. It does not fill the cones with cannabis material; for that step, you would use a machine like the STM Canna RocketBox 2.0. This machine is one component of STM's One-Tray Automated Workflow system, which handles the cone-loading stage of pre-roll production.

Can I use the Cone Lander with different cone sizes interchangeably? +

No, each Cone Lander machine is calibrated for one specific cone size (either 84mm, 98mm, or 109mm). The machine cannot be adjusted to accommodate different sizes. If you need to work with multiple cone sizes, you would need a separate Cone Lander for each size.

What is STM's One-Tray Automated Workflow? +

STM's One-Tray Automated Workflow is an integrated system for efficient pre-roll production, where the Cone Lander loads cones into standardized 72-count trays. These trays then move to other stations for filling, closing, and even infusing with the STM Canna Astro Infuser. This system approach maximizes efficiency, and you can learn more in our ultimate guide to pre-roll production.

What warranty coverage does the Cone Lander include? +

The STM Canna Cone Lander comes with a comprehensive 1-year manufacturer warranty from Sesh Technologies Manufacturing. This warranty covers defects in materials and workmanship, and any warranty repairs must be performed by authorized STM technicians or service facilities. The warranty is non-transferable and applies only to the original purchaser.

How difficult is it to operate the Cone Lander? +

The Cone Lander is designed for effortless operation with a simple three-step process: (1) Pull out the side drawer and load stacks of empty cones, (2) Place an empty STM 72-count tray in the drawer and close both the drawer and front door, (3) Select your crutch size and push the cycle button. The entire process takes just seconds and requires minimal training.

Search

STM Canna Cone Lander Pre-Roll Cone Loading Machine

See it in action