Ideal-Air Pro Series Dehumidifier | 60-120 Pints/Day

Under grow room conditions of 86°F and 80% relative humidity, the Ideal-Air Pro Series removes 120 pints of water per day. For industrial-scale needs, the Ideal-Air Pro Series 180 Pint is available for maximum extraction. The AHAM-rated 60 pints/day figure reflects the standardized DOE test conditions of 80°F and 60% RH.

The built-in condensate pump actively pushes collected water out of the unit rather than relying on gravity, allowing you to route drainage upward or horizontally to a sink, drain, or reservoir. This eliminates the need for the unit to be positioned directly above or adjacent to a floor drain.

The Pro Series supports three drainage configurations: the internal condensate pump for flexible water routing, a gravity drain for direct connection to a nearby floor drain, or permanent plumbing to a sewer line or reservoir for fully hands-free long-term operation.

The LED control panel allows you to set your target relative humidity anywhere between 35% and 85% RH in 5% increments. This level of precision lets you dial in the exact environment your crop requires. If your space needs added moisture instead, the Ideal-Air Pro Series 300 Pint or the heavy-duty 600 Pint Ultrasonic Humidifier can provide the necessary balance.

The 10-liter (21-pint) reservoir triggers an automatic shutoff when it reaches capacity, preventing any overflow. Simply remove the tank, empty it, and reinsert — the unit resumes normal operation immediately. For high-volume environments, setting up continuous drainage is recommended to avoid interruptions.

Yes. The unit includes an automatic low-temperature defrost function that prevents ice buildup on the coils when operating in cooler conditions, allowing efficient and uninterrupted performance without manual intervention.

The filter is fully removable and washable — pull it out, rinse it under water, let it dry completely, and reinsert. Keeping the filter clean ensures optimal airflow across the 271 CFM rated capacity and extends the life of the unit's compressor.