Skip to main content

(360) 800-5535 · Mon–Fri 9am–5pm PST

Login
0 Cart { % include 'bold-options-hybrid-cart-item-count' % }
Financing Available Starting at 0% interest Login
Mon-Fri 9am-5pm PST
(360) 800-5535 info@trimleaf.com
Search
0 Cart
(360) 800-5535

Send Us a Message

Search

AquaVita


A weak pump doesn't just slow flow — it starves roots of oxygen and lets nutrient solution stagnate, and by the time symptoms show up on the leaves, the damage is already done. AquaVita builds submersible and air pumps calibrated to exact GPH and L/Min output, so reservoirs stay circulated and dissolved oxygen stays where roots need it. The AquaVita 396 handles mid-size reservoir turnover, while the AquaVita 1030 commercial air pump keeps larger systems fully oxygenated around the clock.

1949 Verified Reviews 4.8/5
Free Shipping on Most Items
We Price Match
Easy Returns

Buyer's Guide

AquaVita: Complete Guide

Calibrated Flow for Every Reservoir Size

Hydroponic systems live or die on water and air movement. Undersized pumps create dead zones where nutrients settle and pathogens take hold; oversized ones waste energy and stress fittings. AquaVita's lineup is built in graduated output steps, so growers can match pump capacity to reservoir volume instead of guessing.

Built for Reservoir-Grade Reliability

Every AquaVita pump is designed around one job: move water or air continuously without failure. That reliability shows up in three places.

  • Submersible Water Pumps: Rated from 100GPH up through 1585GPH, these units drop directly into reservoirs and sumps to keep nutrient solution circulating and evenly mixed.
  • Commercial-Grade Air Pumps: Diaphragm-driven and rated up to 1744GPH airflow, these units push consistent oxygen into reservoirs and air stones without the pulsing output of cheaper models.
  • Stainless Steel Sump Options: Corrosion-resistant sump pumps handle drain-to-waste runoff and dirtier water without the impeller fouling common to standard plastic housings.

Matching GPH to Your System Size

Sizing a pump correctly means looking at total reservoir volume and turnover rate, not just tank size on paper.

  • Small Reservoirs and Single-Bucket DWC: The AquaVita 100 suits single-bucket setups or small top-feed systems where gentle, steady turnover is enough.
  • Commercial Runs and Multi-Zone Setups: The AquaVita 2378 sump pump handles high-volume drain-to-waste or multi-zone irrigation where flow can't afford to bottleneck.
  • Oxygenation Ecosystem Tip: Pair any AquaVita air pump with an air stone to diffuse output into fine bubbles instead of one large column, which dramatically increases dissolved oxygen transfer.

Keeping Pumps Running at Full Output

A pump only performs to spec if it's maintained correctly. A few habits extend service life and keep GPH ratings accurate.

  • Flush Between Nutrient Changes: Mineral buildup on the impeller is the leading cause of gradual GPH loss — a quick rinse at every reservoir change prevents it.
  • Keep Air Pumps Elevated: Mounting air pumps above the waterline prevents backflow siphoning during power outages, which can flood and ruin the diaphragm.
  • Match Tubing Diameter to Output: Undersized tubing chokes flow even from a correctly rated pump, so verify hose ID matches the pump's outlet before installing.

Correct pump sizing and airflow are two of the biggest variables behind consistent yields in any recirculating setup — for a broader look at why growers move to these systems in the first place, see 7 Big Advantages of Hydroponics.

Frequently Asked Questions

What's the difference between an AquaVita submersible water pump and a sump pump?
Submersible water pumps are built for clean nutrient solution and general reservoir circulation. Sump pumps use a more robust stainless steel housing designed to handle dirtier runoff, sediment, and drain-to-waste water without impeller fouling.
How do I calculate the right GPH for my reservoir?
A good baseline is turning over the full reservoir volume at least once every one to two hours. Divide total reservoir gallons by the desired turnover time in hours to get a target GPH, then round up to the nearest available pump size.
Can AquaVita air pumps run continuously without overheating?
Yes. The diaphragm design in AquaVita's commercial air pumps is built for 24/7 operation, which is standard for hydroponic reservoirs that need constant oxygenation to prevent root rot.
Do I need both a water pump and an air pump for a DWC system?
In most single-bucket DWC setups, an air pump alone can maintain adequate dissolved oxygen. Multi-bucket or recirculating systems typically need a water pump as well to move solution between buckets and keep nutrient concentration even.
How many air stones can one AquaVita air pump support?
It depends on the pump's total L/Min output and each air stone's resistance. Smaller single-outlet pumps typically run one to two stones well, while commercial multi-outlet models can support a full bank of stones across several reservoirs.
What's the difference between GPH and L/Min ratings?
GPH (gallons per hour) measures water pump output, while L/Min (liters per minute) measures air pump output. They're different units for different pump types and aren't directly interchangeable when comparing specs.
How often should reservoir water pumps be cleaned?
Rinse the impeller housing every time the reservoir is drained and refilled, typically every one to two weeks depending on the grow. Mineral and biofilm buildup is the most common cause of gradual output loss.
Are AquaVita pumps safe for use with hydroponic nutrient solutions?
Yes. AquaVita water pumps are designed for submerged operation in nutrient-rich reservoir water, not just plain water, making them suitable for standard hydroponic feeding schedules.
Expert Support

Need Help Choosing the Right Equipment?

Our team is here to help. Call us or browse our curated guides.

Call (360) 800-5535 Browse Guides