Vivosun 300W Submersible Water Pump (3700GPH)
Large ponds, multi-tier waterfalls, and high-volume reservoirs need more flow than an entry-level pump can deliver. When circulation falls short, you get stagnant zones, weak water features, and filters that never see the full volume of water. The Vivosun 300W Submersible Water Pump moves up to 3,700 gallons per hour, roughly 40% more than the 2,600 GPH Vivosun 200W model. That extra volume turns over bigger bodies of water and drives more dramatic cascades.
Under the IPX8 waterproof housing, the shaft and drive ring are made of wear-resistant silicon carbide, and overload protection shuts the motor down before damage occurs. A detachable intake filter and the included mesh barrier bag keep debris from reaching the impeller. Even at full output, the Vivosun 300W pump runs at a quiet 30–40 dB.
Set it up to suit your system. The Vivosun 300W pump works fully submerged or inline outside the water, provided water flows through the pump body. Three included adapters connect tubing from 0.8" up to 2" and tighten by hand with a flat rubber washer seal. The adjustable outlet direction and 20 ft power cord simplify routing to filters, fountains, and statuary.