Faven Lighting Under Canopy R8 4' x 8' Starter Pack - 240V

Position the four R8 lights in a linear configuration along the length of your 4x8 space, spacing them evenly to ensure uniform light distribution. Use the included adjustable stands to target the lower third of your canopy, and connect all fixtures using the jumper cable and couplings. The Growing with Faven Guide provides detailed layout diagrams for maximum effectiveness.

The 240v configuration is designed for international markets and facilities with higher voltage electrical systems, common in many countries outside North America. Verify that your facility operates on 240v power before installation. If you're in a region with 120v standard power, you'll need the 120v version of this starter pack instead.

The couplings enable you to daisy-chain all four R8 fixtures together in series, creating a unified lighting system controlled by a single mini controller. This simplifies installation by reducing the number of power connections needed and ensures synchronized dimming across all fixtures. The system draws power from one source while distributing it to all four lights.

Over 85% of Faven customers report full return on investment within a single grow cycle. A typical 20% yield increase covers the cost of the lights, with additional value from reduced labor (less under-clearing), fewer low-value smalls, and improved product uniformity. Many operations also benefit from electrical rebates that further accelerate payback.

Yes, Faven under canopy lights are designed as supplemental lighting to work alongside any overhead LED grow lights or HPS system. The lights target lower canopy zones that overhead fixtures cannot adequately illuminate, regardless of your primary lighting setup. The dimming controller allows you to balance intensity with your specific overhead configuration. To learn more about optimal placement, consult our guide on how far you should hang your LED grow lights.

Each R8 fixture draws 120 watts, bringing the total system power consumption to 480 watts at full intensity. However, the included dimming controller allows you to reduce power consumption during vegetative stages or when full intensity isn't required. This flexibility helps optimize energy costs while maintaining the yield-boosting benefits of under canopy lighting.

Absolutely. The Faven Lighting system is modular and scalable using additional jumper cables and couplings to daisy-chain more fixtures. You can add R8 lights to expand coverage beyond 4x8, or combine multiple starter packs, like the smaller 4' x 4' starter pack, for very large operations. This allows you to grow your under canopy lighting system incrementally as your cultivation area expands.

By delivering usable light throughout the entire canopy depth, Faven lights eliminate the need for extensive under-clearing and lollipopping during the vegetative stage. Lower branches develop into productive, high-quality colas rather than becoming waste material. This reduces both cultivation labor and post-harvest sorting time spent separating premium flower from low-value smalls.

The Faven system's DLC certification makes it eligible for utility rebate programs in many regions, which can offset 20-40% of the initial investment. Rebate availability and amounts vary by location and utility provider. Contact your local utility company or energy efficiency program to determine specific rebate opportunities in your area.