(360) 800-5535 · Mon–Fri 9am–5pm PST
Earn 16 points for shopping and get $0.16 off your next order. Join Harvest Club for free.
We support operations & licensed facilities with volume pricing, dedicated account managers, and custom equipment consultation.
Cutting into an existing PVC line just to add a sensor or dosing point is disruptive and time-consuming. This tapping saddle solves that by mounting directly onto a 50mm PVC pipe, giving you a 1/2" female thread for quick, secure inline integration of electrode holders or injection valves without modifying or cutting the pipe itself.
The 1/2" female BSP thread is compatible with standard 12mm probe holders and injection valves, making it a straightforward way to add inline measurement or dosing to an irrigation, hydroponics, or water treatment setup. For automated nutrient management, it works seamlessly with the C800 Pro pH/EC Inline Controller and its compatible sensors. Built from durable PE (polyethylene), it's designed to hold up to long-term use in these applications.
Installation is simple: position the saddle around the pipe and fasten it with the included bolts, drill through the opening inside the threaded port to access the pipe interior, then screw in your chosen hardware. If your system uses smaller piping, we also stock the 40mm tapping saddle. Always install with appropriate sealing, such as PTFE tape or a gasket, to ensure leak-free operation.
Mounts directly onto a 50mm PVC pipe without modifying or cutting the line.
Built from polyethylene for long-term use in irrigation, hydroponics, or water treatment.
Fastens with included bolts for quick, minimal-effort inline installation.
| Specification | Value |
|---|---|
| Compatibility | 50mm PVC Pipe |
| Thread Type | 1/2" Female BSP |
| Material | PE (Polyethylene) |
| Size | 50mm x 1/2" |
This tapping saddle is designed for use only on 50mm PVC pipe.
The 1/2" female BSP thread is compatible with standard 12mm electrode holders and 1/2" injection valves.
No, the saddle mounts around the existing pipe. You'll drill through the threaded port opening to access the pipe interior, but the pipe itself doesn't need to be cut.
Yes, always install with appropriate sealing, such as PTFE tape or a gasket, to ensure leak-free operation.
It's built for long-term use in irrigation, hydroponics, or water treatment systems, especially when paired with a C10 peristaltic dosing pump for precise nutrient adjustment.
Our specialists are happy to help. Call us or send a message and we'll get back to you within one business day (most of the time within a few hours.)
Equipping home growers, craft producers, and commercial operations across North America since 2016.
