Dialed In

Reach the Bud Sites Overhead Light Leaves Behind

Fixed-spectrum lighting can't adapt as a plant moves from stretch to finish, and by the time the shortfall shows up in the scale, that weight is already gone. Dialed In builds the fixture and the controller as one system, so the spectrum hitting the lower canopy changes on command instead of staying static all season.

Tunable Output That Matches the Growth Phase

The Tri-Spec isn't a single fixed output pretending to be flexible — it runs three independently tunable channels, and the controller that drives them turns spectrum shifts into a scheduled, repeatable step rather than a manual chore.

• Three Independent Channels: The Tri-Spec 150W separates Full+Red, Far-Red, and UV, so structure-building, canopy penetration, and resin production can each be dialed in on their own instead of fighting over one fixed spectrum.
• Automated Recipes and Sensing: The Tri-Chan's 4.3" touchscreen builds custom spectrum recipes by phase or cultivar, schedules sunrise-to-sunset transitions, and reads live temperature, humidity, and PPFD data instead of leaving those calls to guesswork.
• Built to Run Silent and Stay Reliable: Passive cooling means no fans pulling contaminants through the flowering room, and an L80 rating past 50,000 hours keeps output consistent run after run.

Sizing a Under-Canopy System to the Room

The right setup depends on how many rows need coverage and how the fixtures will be wired together.

• Single-Row or Tent Grows: One Tri-Spec fixture slots beneath the canopy of a single row without adding another zone to manage.
• Multi-Row Commercial Rooms: Because the fixture daisy-chains up to eight units per circuit, a 6-meter daisy-chain cord links fixtures across wider rows, while the 3-meter version handles tighter row spacing.
• Centralized Dimming: A 0-10V power cord connects each fixture back to the Tri-Chan controller, so an entire daisy-chained row dims and shifts spectrum together instead of fixture by fixture.

Getting the Most Out of Under-Canopy Lighting

A few placement and scheduling habits make the difference between a wasted add-on and a real yield gain.

• Mount Low and Angle Inward: Position fixtures close enough to the lower canopy to reach shaded bud sites without scorching foliage directly beneath the diodes.
• Shift Spectrum by Phase: Lean on Full+Red for structure early, bring in Far-Red for canopy penetration, then ramp UV in the final weeks to push resin and terpene development.
• Pair with Overhead Coverage: Under-canopy fixtures supplement rather than replace a primary overhead LED grow light — the top canopy still needs its own full-spectrum source.

Dialed In turns the lower canopy from a write-off into finished weight, with the controller ecosystem to back it up. For a deeper look at why this layer matters, see why every indoor grower should consider under-canopy lighting, and browse the full under-canopy lighting selection for additional brands and formats.

Frequently Asked Questions