Vivosun 55W Commercial Air Pump (1427GPH)

The included manifold has 12 outlets, each with its own adjustable valve and a fitting for standard 1/4" air line. You can run up to 12 lines at once and use the valves to balance airflow between reservoirs, buckets, or tanks.

Set the pump on a flat, stable surface at least 12" (30 cm) above the water level so liquid can't flow back into it. Keep it in a well-ventilated area between 32°F and 100°F (0–38°C), and make sure it's properly grounded. If installed outdoors, protect it from rain and direct sunlight.

Yes. The pump is designed for continuous operation. Its wear-resistant steel engine column and piston, plus aluminum heat-radiating plates, help it handle round-the-clock use without overheating.

No. The pump uses an oil-free motor design, and you should never add oil to it. There's nothing to lubricate or maintain, and no risk of oil contaminating your reservoir or tank.

First check that the power supply is connected, and inspect the tubing for breaks, cuts, loose nipples, or eroded joints. Then check whether a piston is blocked or damaged by liquid, and listen to confirm the motor is still running normally. If you hear unusual noises or vibrations, the pump needs repair.

Cover the pump and store it in a dry, dust-free space. To keep it in good working condition, run it for a few minutes every month during storage.