Electrivo Pro Controller Full Spectrum LED Grow Light

• The Lighting Control CHL-Pro is a dual channel light controller. Each of the controller's two channels can control up to 40 fixtures or ballasts.

• It is possible to use those channels to control fixtures in two completely independent rooms, or to control up to 80 fixtures in one room.

• With an External Contact Module (ECMI auxiliary equipment can be controlled. Up to two ECMs can be connected. An alarm can be connected to go off at temperature shutdown or power outage. These devices need to be purchased separately.

• Temperature monitoring in both Celsius and Fahrenheit

• Auto-dim and shutdown controlling available.

• Shutdown, sensor failure, or power off alarms will always be logged. Access the log by opening the menu and select ‘Logs’.

• If you want to use the controller to control for example a CO2 source, a light or watering unit, or a heater, you'll need an External Contactor Module or ECM. You can control up to two ECMs. ECM1 follows channel 1, ECM2 follows channel 2.

• Temperature: 0-35 °C / 32 - 95 °F

• Operating humidity [non-condensing): <80%

• Find a suitable place for the temperature sensor and the controller. Hang the sensor between the plants on average canopy height and preferably not against the wall. Do not position it in direct airflow.

• If you are using another climate control system, hang it close to the sensor of that system. If necessary, the sensor cable may be lengthened an extra 5 meter with a standard 3.5 mm jack extension cable. A sensor with a cable length of 30 meter is also available.

• Indoor Farming

Electrivo offers a 1-year warranty for the Controller. Warranty does not cover user error or operator abuse.